YN22050 wire winding testing machine 
 Overview: 
 Wire winding testing machine according to GB/4909.7-1985 bare wire and test methods. Winding test standards making is made; the toughness of the metal wire winding detection and zinc coating adhesion; the rotating part of the machine advanced servo motor and precision-tighten the chuck system to do, has to do gymnastics simple, low tone, smooth operation, accurate test impatient; the user must carefully before using the unit read GB/4909.7-1985 standard, carefully read the machine manual, familiar with the performance of the machine, in order to accurately use this machine to complete the winding test. 


 The main technical parameters; 
 A winding range: aluminum aluminum: Ф3mm-6mm mandrel, Ф3mm the following recommendations with manual winding wire; Ф4mm the following 
 2 Mandrel range: 1mm, φ2mm, φ3mm, φ4mm, φ5mm, φ6mm, φ8mm, φ10 mm, φ12 mm, φ14mm, φ16mm 
 3, the winding speed: 0r/min-15r/min (adjustable) 
 4, the mandrel effective working length: 70mm 
 5, the pressure strip width: 200mm 
 6, the motor: power 0.37KW 
 7, Dimensions: 900mmx600mmx1000mm 
 8, rated voltage: 220V, 50HZ